• 爱情文章
  • 亲情文章
  • 友情文章
  • 生活随笔
  • 校园文章
  • 经典文章
  • 人生哲理
  • 励志文章
  • 搞笑文章
  • 心情日记
  • 英语文章
  • 范文大全
  • 作文大全
  • 新闻阅读
  • 当前位置: 山茶花美文网 > 亲情文章 > 正文

    误删除分区 [CentOS,6误删除的boot分区该如何还原恢复]

    时间:2020-05-23来源:山茶花美文网 本文已影响 山茶花美文网手机站

    CentOS 6误删除的boot分区该如何还原恢复

    在CentOS 6系统中,因为不小心或操作失误导致boot分区被删除,遇到这种情况是否能够恢复被删除的boot分区呢?其实是可以的,下面随小编一起来了解下吧。

    1.首先利用centos6镜像进入linux rescue救援模式。

    CentOS 6误删除的boot分区该如何还原恢复1

    2.启动sshd服务,查看eth0获取的ip地址,然后用ssh secure shell 连接。

    SSH Secure Shell 3.2.9 (Build 283)

    Copyright (c) 2000-2003 SSH Communications Security Corp - /

    This copy of SSH Secure Shell is a non-commercial version.

    This version does not include PKI and PKCS #11 functionality.

    [root@localhost ~]# cd /boot //进入/boot分区

    [root@localhost boot]# ls //查看boot分区的内容

    config-2.6.32-71.el6.i686 symvers-2.6.32-71.el6.i686.gz

    grub System.map-2.6.32-71.el6.i686

    initramfs-2.6.32-71.el6.i686.img vmlinuz-2.6.32-71.el6.i686

    [root@localhost boot]# cd 。。//返回上层目录

    [root@localhost /]# rm -rf /boot/*//删除/boot分区所有内容

    [root@localhost /]# ls /boot//查看/boot分区内容为空

    [root@localhost /]# mount /dev/sr0 /mnt//挂载cdrom设备到/mnt目录下

    mount: block device /dev/sr0 is write-protected, mounting read-only

    [root@localhost /]# rpm -ivh /mnt/Packages/kernel-2.6.32-71.el6.i686.rpm --root=/ --force //安装光盘的kernel软件包

    Preparing.。。 ########################################### [100%]

    1:kernel ########################################### [100%]

    [root@localhost /]# ls /boot //查看/boot分区内容

    config-2.6.32-71.el6.i686 System.map-2.6.32-71.el6.i686

    initramfs-2.6.32-71.el6.i686.img vmlinuz-2.6.32-71.el6.i686

    symvers-2.6.32-71.el6.i686.gz

    [root@localhost /]# mkdir /boot/grub//在/boot目录新建一个grub目录

    [root@localhost /]# touch /boot/grub/grub.conf//新建一个grub.conf配置文件

    [root@localhost /]# cp -rf /usr/share/grub/i386-pc/* /boot/grub/ //把/usr/share/grub/i386-pc的所有内容拷贝到/boot/grub中。

    [root@localhost /]# ls /boot//查看/boot分区内容

    config-2.6.32-71.el6.i686 symvers-2.6.32-71.el6.i686.gz

    grub System.map-2.6.32-71.el6.i686

    initramfs-2.6.32-71.el6.i686.img vmlinuz-2.6.32-71.el6.i686

    [root@localhost /]# ls /boot/grub/ //查看/boot/grub目录内容

    e2fs_stage1_5 iso9660_stage1_5 stage1 vstafs_stage1_5

    fat_stage1_5 jfs_stage1_5 stage2 xfs_stage1_5

    ffs_stage1_5 minix_stage1_5 stage2_eltorito

    grub.conf reiserfs_stage1_5 ufs2_stage1_5

    [root@localhost /]# fdisk -l //查看分区

    Disk /dev/sda: 21.5 GB, 21474836480 bytes

    255 heads, 63 sectors/track, 2610 cylinders

    Units = cylinders of 16065 * 512 = 8225280 bytes

    Sector size (logical/physical): 512 bytes / 512 bytes

    I/O size (minimum/optimal): 512 bytes / 512 bytes

    Disk identifier: 0x000b1db4

    Device Boot Start End Blocks Id System

    /dev/sda1 * 1 13 102400 83 Linux//这个为/boot启动分区

    Partition 1 does not end on cylinder boundary.

    /dev/sda2 13 144 1048576 82 Linux swap / Solaris

    Partition 2 does not end on cylinder boundary.

    /dev/sda3 144 2611 19819520 83 Linux //这个为/根分区

    [root@localhost /]# mount//查看所有挂载分区

    /dev/sda3 on / type ext4 (rw)//根分区

    /dev/sda1 on /boot type ext4 (rw)//boot分区为sda1

    devpts on /dev/pts type devpts (rw)

    tmpfs on /dev/shm type tmpfs (rw)

    proc on /proc type proc (rw)

    sysfs on /sys type sysfs (rw)

    /dev/sr0 on /mnt type iso9660 (ro)

    [root@localhost /]# grub//启动grub

    Probing devices to guess BIOS drives. This may take a long time.

    GNU GRUB version 0.97 (640K lower / 3072K upper memory)

    [ Minimal BASH-like line editing is supported. For the first word, TAB

    lists possible command completions. Anywhere else TAB lists the possible

    completions of a device/filename.]

    grub》 root (hd0,0) //首先find /grub/stage1查看/boot分区为(hd0,0)

    root (hd0,0)//设置/boot分区为/dev/sda1

    Filesystem type is ext2fs, partition type 0x83

    grub》 setup (hd0)//重新安装grub

    setup (hd0)

    Checking if “/boot/grub/stage1” exists.。。 no

    Checking if “/grub/stage1” exists.。。 yes

    Checking if “/grub/stage2” exists.。。 yes

    Checking if “/grub/e2fs_stage1_5” exists.。。 yes

    Running “embed /grub/e2fs_stage1_5 (hd0)”。。。 26 sectors are embedded.

    succeeded

    Running “install /grub/stage1 (hd0) (hd0)1+26 p (hd0,0)/grub/stage2 /grub/grub.conf”。。。 succeeded

    Done.

    grub》 quit//退出

    3.重新reboot启动系统进入grub界面测试

    CentOS 6误删除的boot分区该如何还原恢复2

    4.查找find /grub/stage1然后找到/boot分区为(hd0,0),指定kernel,initrd, boot启动系统成功。

    CentOS 6误删除的boot分区该如何还原恢复3

    5.系统启动成功,然后进入系统重新写/boot/grub/grub.conf文件。

    CentOS 6误删除的boot分区该如何还原恢复4

    6.[root@localhost /]# vi /boot/grub/grub.conf配置文件如下:

    最后填写grub.conf文件内容

    default=0 //默认菜单为第一个

    timeout=6//等待时间为6秒

    title mylinux //启动标题为mylinux

    root (hd0,0) //boot所在分区为/dev/sda1

    kernel /vmlinuz-2.6.32-71.el6.i686 ro root=/dev/sda3 rhgb quiet//kernel所在位置以只读模式挂载/dev/sda3根分区rhgb quiet为安静模式不显示内核信息。

    initrd /initramfs-2.6.32-71.el6.i686.img//加载initrd镜像。

    7.最后进入linux rescue重建一个grub

    CentOS 6误删除的boot分区该如何还原恢复5

    8.最后启动界面如下

    CentOS 6误删除的boot分区该如何还原恢复6

    上面就是CentOS 6恢复被删除boot分区的方法介绍了,步骤有些长,如果觉得麻烦的话可以重装系统,同样能恢复boot分区。

    • 爱情文章
    • 亲情文章
    • 友情文章
    • 随笔
    • 哲理
    • 励志
    • 范文大全